Applica LitterMaid Elite LME9000 Instructions d'exploitation télécharger pdf (Page 6)

Need Help?

For service, repair, or any questions regarding your appliance, call the appropriate “800”

number listed below. Do NOT return the product to the place of purchase. Do NOT mail

the product back to the manufacturer nor bring it to a service center. You may also want

to consult the website listed below.

FULL ONE-YEAR WARRANTY

Applica warrants this product against any defects that are due to faulty material or

workmanship for a one-year period after the original date of consumer purchase. This

warranty does not include damage to the product resulting from accident, misuse, or

repairs performed by unauthorized personnel. If the product should become defective

within the warranty period, or you have questions regarding warranty or service, call

Customer Service and Information listed below.

This warranty gives you specific legal rights and you may also have other rights which

vary from state to state or province to province.

CUSTOMER SERVICE

If you should have any questions regarding the installation, operation or use of this

product, visit our web site, www.littermaid.com, call or write to:

Applica Consumer Products

Consumer Assitance

6 Armstrong Road

Shelton, CT 06484

1-800-LIT-MAID

(548-6243)

When calling, be sure to press the appropriate prompt regarding your concerns.

latch firmly against tabs on litter pan until a click is heard to indicate that both

sections are locked in place.

9. IMPORTANT: Wipe any dust off the two sensors.

10. Plug in the AC power adapter and/or replace batteries.

11. Slide the On/Off switch to the On position to reactivate automatic operation.

REMOVING WASTE RECEPTACLE:

1. Depress the two raised areas extending through the openings in the compartment

cover.

2. Detach the disposable waste receptacle lid from the cover of the waste receptacle

compartment.

3. Lift the compartment cover, exposing the closed waste receptacle assembly.

4. Pull the waste receptacle compartment cover edge free from tabs holding it in place

and lift out.

5. To dispose of waste receptacle compartment cover, press in on four corners of lid to

secure lid to the waste receptacle, and dispose.

6. If you wish to reuse the waste receptacle compartment cover, remove it for cleaning

and reinstall after cleaning.

Avoid contact with any waste material. We recommend wearing rubber or latex gloves

while handling used waste receptacle.

Disposable waste receptacles are available in packages of 12 and may be purchased

through your local retailer or by visiting us at our web site at www.littermaid.com

or calling us at 1-800-LIT-MAID. We will be happy to assist you in any way we can.

8. Clean rake with a soft cloth using warm water and a mild detergent. Do not use

scouring pads or harsh or abrasive chemicals. Spray rake lightly with a silicon spray

or baby oil before reinstalling.

Note: Use the cleaning brush to clean the rake quickly and easily.

REINSTALLING RAKE

1. Align the 4 slots on the rake with the screws on the rake assembly housing and push

to snap in place. Press firmly at the base of the rake, so that it clicks onto the rake

assembly housing, indicating the rake has been properly installed.

2. Rake needs to be snapped in completely. There should be no space between the

edge of the rake and the rake assembly housing. If necessary retighten screws no

more than 1/8 of a turn.

3. If using with an adapter, plug unit in, batteries may be reinstalled.

4. Switch the power switch to the On position.

5. Unit is ready to resume initial cleaning pass and is ready for operation.

RAKE REMOVAL FOR CLEANING

OR REPLACEMENT

RAKE : The rake can be removed for cleaning or replacement. NOTE: We suggest

wearing rubber or latex gloves while handling the soiled rake.

1. Flip waste receptacle compartment cover open

(Fig.8).

2. With AC power adapter plugged in, or batteries

installed, turn unit On.

3. Rake will automatically undergo the initial

cleaning pass.

4. As rake climbs up the incline near the waste

receptacle compartment cover, quickly move

the On/Off switch to the Off position and unplug

the AC power adapter and remove batteries.

5. Place fingers on underside of the rake and gently pull the rake up and out toward

waste receptacle compartment cover. Notches on rake bar detach from screws on

the rake assembly housing (Fig. 8).

6. If rake fails to unsnap, use a Phillips screwdriver to loosen screws on underside

of the rake assembly. Loosen no more than 1/8 of a turn.

7. Unsnap rake.

FIG. 8

Screws

2000_9_8_30_LIT 2/2/01 4:47 PM Page 10

1 2 3 4 5 6 7

Commentaires sur ces manuels

Pas de commentaire

Applica LitterMaid Elite LME9000 Instructions d'exploitation Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Soins des animaux Applica LitterMaid Elite LME9000